跳到主要內容區
:::

江支弘

  

姓名

江支弘

學歷

1. University of Colorado Boulder / Solid Mechanics, Mechanical Engineering (博士PhD)

2. 台灣大學 National Taiwan University / 機械工程系

專長

1.非破壞檢測 2. 熱影像法 3. 應用力學

經歷

1. Construction Engineering, Chaoyang University of Technology / Professor (2005-08 ~ 2019-07)

2. Construction Engineering, Chaoyang University of Technology / Associate Professor (1994-06 ~ 2005-07)

3. University of Colorado / TA/RA (1992-09 ~ 1993-12, 兼職)

E-mail

chiangc@cyut.edu.tw

研究室

V-401 / E-403

研究室電話

7871 / 4248

Research project 2019~2024: Nondestructive inspection of composite materials using heat analysis and infrared thermography複合材料非破壞檢測之熱學分析與紅外線熱影像法驗證 (108年度 110~112年度科技部專題計畫)


Affiliations
朝陽科技大學航空學院 Dean, College of Aviation, Chaoyang University of Technology
亞太非破壞檢測聯盟理事 Board member, Asia Pacific Federation for Non Destructive Testing
NDTE期刊編輯Subject Editor, NDT&E International – an Elsevier Journal
台灣非破壞檢測協會學術委員、授證管理委員會委員The Society for Nondestructive Testing & Certification of Taiwan (SNTCT)

 

Selected Publications
J1. Huang, Y., Chen, C.-L., Chiang, C.-H. (2023) Analyzing a series of thermal infrared images to identify defects using a hybrid approach that combines robust principal component analysis and image segmentation. NDT and E International, 137, art. no. 102818, (DOI: 10.1016/j.ndteint.2023.102818) (SCI)(Scopus)
J2. Hidayat, M., Chiang, C.-H.*, Yen, M. (2023) Determination of the defect’s size of multi-layer woven CFRP based on its temperature profile. International Journal of Applied Science and Engineering 20:3 (Scopus) (https://doi.org/10.6703/IJASE.202309_20(3).003)
J3. Prasad, S., Chiang, C.-H., Kumar, D., Kalra, S., Khandelwal, A. (2023) Robust and efficient feature-based method for structural health monitoring of large structures. Journal of Civil Structural Health Monitoring, (DOI: 10.1007/s13349-023-00686-5)
J4. Kumar, D., Chiang, C.-H.*, Lin, Y.-C. (2022) Experimental vibration analysis of large structures using 3D DIC technique with a novel calibration method. Journal of Civil Structural Health Monitoring 12(2) 391-409. (SCI) (Scopus) (https://doi.org/10.1007/s13349-022-00549-5)
J5. Lee, M.-G., Lo, S.-L., Kan, Y.-C., Chiang, C.-H. (2022) Water quenched slag from incinerator ash used as artificial stone. Case Studies in Construction Materials 16 e00827 (DOI: 10.1016/j.cscm.2021.e00827)
J6. Chih-Hung Chiang*, Hung-Yu Tao, Yung-Chiang Lin (2021) Transient thermal analysis of layered media based on thermal quadrupoles. International Journal of Applied Science and Engineering 18:3 (Scopus) (DOI: 10.6703/IJASE.202106_18(3).001)
J7. Lin, Y-C., Chiang, C-H., Yu, C-P., Kumar, D., Hsu, K-T. (2021) Application of DIC method to modal vibration study for structure health monitoring of WT tower. International Journal of 江支弘 Chih-Hung Chiang, Chaoyang University of Technology Applied Science and Engineering 18:3 (Scopus) (DOI: 10.6703/IJASE.202106_18(3).003)
J8. Yung-Chiang Lin, Chih-Hung Chiang*, Chih-Peng Yu, Keng-Tsang Hsu (2020) Deterministic deterioration modeling of wind turbines toward the failure identification – a modal curvature approach, Journal of Structural Integrity and Maintenance, 5:2, 104-112, (DOI:10.1080/24705314.2020.1729518)(Scopus)
J9. Huang, Y., Shih, P., Hsu, K.-T., Chiang, C.-H. (2020) To identify the defects illustrated on building facades by employing infrared thermography under shadow, NDT & E International, 111 (DOI: 10.1016/j.ndteint.2020.102240) (SCI)(Scopus)
J10. Chih-Hung Chiang*, Keng-Tsang Hsu, Chih-Peng Yu, Chia-Chi Cheng, Jie-Zhen Pan (2018)“Remote measurements and vibration analyses of existing wind turbines,” Journal of Testing and Evaluation vol.47 no.3 pp.2193-2206 (DOI: 10.1520/JTE20180025) (SCI)(Scopus)
J11. Lee, M.-J., Lee, M.-G., Chiang, C.-H., Liang, Y.-H. (2012) “Durability of strengthening wooden members using CFRP sheets”, Advanced Materials Research vol. 374-377, pp. 1589-1592. (EI)
J12. Cheng, C.-C., Cheng, T.-M., Chiang, C.-H.* (2008) “Defect detection of concrete structures using both infrared thermography and elastic waves”, Automation in Construction vol. 18 pp.87-92.(SCI) (EI)
J13. Tsai C-L. and Chiang C-H. (2002) “Pneumatic strains in woven glass/epoxy composite laminate induced by fluctuating air pressure”, Composites Science and Technology vol. 62 pp.451-456.(SCI) (EI)
J14. Chiang C-H., Tsai C-L., and Kan Y-C. (2000) “Acoustic inspection of bond strength of steel-reinforced mortar after exposure to elevated temperatures”, Ultrasonics vol. 38 pp. 534-536. (SCI) (EI) (Refereed and accepted to publish in the Proceedings of Ultrasonics International 1999
joint with 1999 World Congress on Ultrasonics)
J15. Tsai C-L. and Chiang C-H. (2000) “Characterization of hygric behavior of single fiber”, Composites Science and Technology vol. 60 pp.2725-2729. (SCI) (EI)
J16. Bond L.J., Chiang C.H. and Fortunko C.M. (1992) “Absorption of ultrasonic waves in air at high frequencies (10-20MHz)”, J. Acoust. Soc. Am. vol. 92 pp. 2006-2015. (SCI)
J17. Chiang, C.-H., Cheng, C.-C., and Hsu, K.-T. “Inspection of deteriorated coastal embankments using radar, thermography and impact-echo”, Nondestructive Testing of Materials and Structures.RILEM Book series vol. 6, pp.927-933. edited by Oral Büyüköztürk. Springer, Dordrecht, the Netherlands (2013)
J18. 江支弘『紅外線法』收錄於橋梁檢測方法與應用,頁4-96 至4-101,中國土木水利工程學會非破壞檢測委員會編著,台北市,2010 年
J19.江支弘『熱感應』收錄於橋梁檢測基本理論,頁10-31 至10-41,中國土木水利工程學會非破壞檢測委員會編著,台北市,2013 年
C1. Chiang, C.-H., Jahan, K., Hidayat, M., Kumar, D., Cheng, C.-C. (2023) “Evaluation of mechanical properties and damage sensing performance of functionalized carbon nanotube modified epoxy-carbon fiber”, Proceedings of SPIE - The International Society for Optical Engineering,
12487, art. no.124870H (DOI: 10.1117/12.2660954)
C2. Huang, Y., Yang, Q.-Y., Chiang, C.-H. (2023) “Applying the Modified Adaptive Window Sizes 江支弘 Chih-Hung Chiang, Chaoyang University of Technology into the Image Segmentation to Identify Defects from Thermal Infrared Images Covered with Intensity Inhomogeneity”, Proceedings of SPIE - The International Society for Optical Engineering, 12486, art. no.124861P (DOI: 10.1117/12.2657617)
C3. Kumar, D., Chiang, C.-H., Prasad, S. (2022) “Integrating robust feature detection methodology with in-house DIC for identification and correlation of natural patterns on large structures”, Proceedings of SPIE - The International Society for Optical Engineering, 12047, art. no. 120470C (DOI:10.1117/12.2612758)
C4. Prasad, S., Kumar, D., Kalra, S., Chiang, C.-H., Khandelwal, A. (2022) “Automated and Lightweight Feature Detection and Matching towards Real-time SHM of Large Structures”,Proceedings of SPIE - The International Society for Optical Engineering, 12048, art. no. 1204810 (DOI: 10.1117/12.2612799)
C5. Huang, Y., Yang, Q.-Y., Hsu, K.-T., Chiang, C.-H.* (2022) “Identifying Defects under Shadows from a Series of Thermal Images by Employing Robust Principal Component Analysis and Local Binary Function”, Proceedings of SPIE - The International Society for Optical Engineering, 12047, art. no. 120470Y (DOI: 10.1117/12.2613152)
C6. Chiang, C.-H., Hidayat, M., Kumar, D. (2022) “Simulated thermal image based on finite element models for a layered composite structures”, Materials Today: Proceedings (DOI:10.1016/j.matpr.2022.02.539)
C7. Chiang, C.-H., Hidayat, M., Liao, K.-C. (2022) “Performance Proofing of A 3D Printed Specimen Rig Through Actual Testing in The Laboratory”, AASRC2022 Conference 航太學會學術研討會。
C8. 江支弘、陶宏育、林永強(2022) ”關於週期荷載與疊層結構之熱學分析的可能應用” 第21屆非破壞檢測技術研討會暨財團法人台灣非破壞檢測協會年會2022 CNDT,日月潭,2022年10 月27-28 日。
C9. Chiang, C.-H. and Hidayat, M. (2022) “Finite Element-Based 3D Modelling to Simulate Defect in Layered Composite Materials for TNDT” 第21 屆非破壞檢測技術研討會暨財團法人台灣非破壞檢測協會年會2022 CNDT,日月潭,2022 年10 月27-28 日。
C10. 曾靖皓、江支弘、鄭家齊、林永强、鄭柏鈞 (2021) “數位影像相關方法應用於短跨度橋梁振動分析”,台灣混凝土學會2021 年混凝土工程研討會,高雄, 110 年11 月18-19 日。
C11. 鄭柏鈞、江支弘、林永强 (2021) “風機自然頻率與螺栓應力狀態之關聯分析”,第26 屆電子計算機於土木水利工程應用研討會,中央大學,桃園, 110 年8 月30-31 日。
C12. Chih-Hung Chiang*, Muhamad Hidayat, Hung-Yu Tao (2021) “Simulated surface temperature distribution of layered structures for TNDT”, AASRC2021 航太學會學術研討會論文集。(MOST110-2211-E-324-006)
C13. Chan, C. C-K., Kumar, D., Chiang, C-H. (2021) “Coarse and fine localized CNN classifier for intelligent DIC preprocessing in large structure health monitoring sample”, Proceedings of SPIE -The International Society for Optical Engineering, 11592, art. no. 115920L (DOI:
10.1117/12.2584023)
C14. Kumar, D., Chiang, C-H.*, Lin, Y-C. (2021) “Identification and correlation of natural patterns using a hybrid BRISK-DIC method”, Proceedings of SPIE - The International Society for Optical Engineering, 11592, art. no. 115920K (DOI: 10.1117/12.2584776)
C15. Chih-Hung Chiang*, Hung-Yu Tao, Jean-Shyan Wang (2020) “Progressive Damage to CFRP Specimens Due to Tensile Loading –Thermal Modeling and Experimental Analysis”,中國機械工程學會第三十七屆全國學術研討會。國立虎尾科技大學,2020 年11 月20-21 日。
(MOST108-2211-E-324-004)
C16. 江支弘*、陶宏育、王正賢、林永強 (2020) “複合材料中缺陷造成之暫態熱影像分析”,第20屆非破壞檢測技術研討會暨財團法人台灣非破壞檢測協會年會2020 CNDT. 高雄,2020 年10月22-23 日。
C17. Huang, Y., Yang, Q.-Y., Hsu, K.-T., Chiang, C.-H. (2020) “Building cracks identification by employing image segmentation”, Proceedings of SPIE - The International Society for Optical Engineering, 11381, art. no. 113811Y (DOI: 10.1117/12.2558335)(Scopus)
C18. Kumar, D., Chiang, C.-H., Lin, Y.-C., Hsu, K.-T. (2020) “3D vibration studies of large structures using DIC”, Proceedings of SPIE - The International Society for Optical Engineering, 11381, art. no.1138124 (DOI: 10.1117/12.2557007)(Scopus)
C19. Lau, E.M., Kumar, D., Chiang, C.-H., Zhang, J.-D., Huang, W.-X., Khare, V. (2020) “Pressure distribution of a deformable composite flapping wing”, Proceedings of SPIE - The International Society for Optical Engineering, 11379, art. no. 113790M (DOI: 10.1117/12.2558461)(Scopus)
C20. Lin, Y.-C., Cheng, C.-C., Chiang, C.-H., Hsu, K.-T. (2019) “Quantitative assessment of interfacial condition of cold joint using surface wave group velocity profile”,IOP Conference Series: Materials Science and Engineering, 615 (1) (DOI: 10.1088/1757-899X/615/1/012010) (Scopus)
C21. Hsu, K.-T., Cheng, C.-C., Chiang, C.-H., Ke, Y.-T., Cheng, J.-S. (2019) “Long-term monitoring of spillway using various NDT techniques-case studies”, IOP Conference Series: Materials Science and Engineering, 615 (1)( DOI: 10.1088/1757-899X/615/1/012035) (Scopus)
C22. Huang, Y., Chiang, C.-H., Hsu, K.-T. (2019)”Evaluating the shadow or glare effects in thermography for non-destructive testing and evaluation”, Proceedings of SPIE - The International Society for Optical Engineering, 10971, art. no. 1097113 (DOI: 10.1117/12.2514175) (Scopus)
C23. Yishuo Huang, Chih-Hung Chiang, Keng-Tsang Hsu (2018) “Combining the 3D model generated from point clouds and thermography to identify the defects presented on the facades of a building,”Proc. SPIE.10599, 105990G (Scopus) DOI: 10.1117/12.2297656
TR1. 江支弘 (2022) 複合材料非破壞檢測之熱學分析與紅外線熱影像法驗證(II),科技部專題研究報告。
TR2. 江支弘 (2020) 複合材料非破壞檢測之熱學分析與紅外線熱影像法驗證,科技部專題研究報告。
TR3. 江支弘、鄭家齊、余志鵬、黃怡碩、鄭文昌、張家濟、賴俊仁、徐松圻 (2017) 結合 NDT的自動化檢測技術在土木結構健康診斷之應用,科技部專題研究報告。
TR4. 江支弘 (2013) 熱影像法非破壞檢測量化分析技術之研究,國科會專題研究報告。
TR5. 江支弘、蕭文達 (2012) 滲透結晶型防水材料力學性能的測試與評估,國科會產學合作計畫報告。
TR6. 江支弘 (2011) 結構材料性質老劣化之非破壞快速檢測技術開發-子計畫三:紅外線熱影像與光學影像法於大型結構檢測之應用(II),國科會專題研究報告。
TR7. 江支弘 (2010) 結構材料性質老劣化之非破壞快速檢測技術開發-子計畫三:紅外線熱影像與光學影像法於大型結構檢測之應用(I) ,國科會專題研究報告。

瀏覽數: